Binary Star

Open in the builder

1. Open the launch page on this family

   • Open the launch page on this family with the button above.
   • If this browser holds another launch's draft, click Discard draft under Your launch on 1 Token before you open the link, so King of the Pool loads with its whole pot.
   • Check that Hook Blocks says The linked pools are this launch's pools, with a pool on ETH and a pool on USDG.
   • Keep Runs on at Hookr's hook.
   

2. Name the token

   • Open 1 Token and pick New token.
   • Type Sun under Name and SUN under Ticker.
   • Leave Supply at 1,000,000,000.
   

3. Open pool 1 on ETH

   • Open 2 Pools.
   • On Pool 1 · SUN / ETH, type 0.000001 under Opening price. The prices and ranges here are examples.
   • Leave Full range off. Type 0.000001 under Range from and 0.001 under Range to.
   • Check that the card reads tick spacing 60 and Share of supply 70, and leave Quote seed empty.
   

4. Open pool 2 on USDG

   • On Pool 2 · SUN / USDG, type 0.004 under Opening price.
   • Type 0.004 under Range from and 4 under Range to.
   • Check that the card reads tick spacing 10, Share of supply 30 and 3 Hook Blocks · Zap Relay target.
   

5. Keep the supply split

   • Under Pools and trading, keep Supply split on.
   • Check that it says the pools take 100% of the supply.
   • Leave Opening price check off.
   

6. Check pool 1's Hook Blocks

   • Open 3 Hook Blocks and pick the Pool 1 · SUN / ETH tab.
   • Check Your hook: Anti-Snipe before the swap, Dynamic fees, Auto Burn and LP Rewards after it, Arb recapture lane on with King of the Pool, and an empty Advisory slot.
   

7. Keep King of the Pool on

   • Under Arb recapture by What The Hook, keep King of the Pool switched on.
   • Check Pot 50%, Hookr 25%, What The Hook 25%, 1-day rounds and Least buy 0.01 ETH.
   

8. Set the Zap Relay target

   • Pick the Pool 2 · SUN / USDG tab and open Zap Relay target in the block list.
   • Under What a zap does, pick Buy and add liquidity.
   • Leave Price rise per window at 5%, Reward for zapping at 0.5% and Zap once this much gathers at 1,200 USDG.
   

9. Check pool 2's Hook Blocks

   • Check Your hook: Zap Relay target fills the Advisory slot, Arb recapture lane is off, and Dynamic fees and LP Rewards stay on.
   

10. Leave Team and income as it is

    • Open 4 Team and income and leave every row off.
    • Read the note Pool 2 is a Zap Relay target: its zap vault is made on Review.
    

11. Review the two pools

    • Open 5 Review.
    • Check Supply split pool 1 70% · pool 2 30%.
    • Under What differs between pools, check that pool 1 has arb recapture and King of the Pool and pool 2 has the Zap Relay target with Buy and add liquidity.
    

12. Make the vault and launch

    • Click Connect wallet. The vault and launch steps on Review appear once a wallet is connected.
    • Make pool 2's zap vault on Review, then sign the launch.
    • Copy the vault's address from Review and give it to MOON's creator.
    

Open in the builder

1. Open the launch page on this family

   • Open the launch page on this family with the button above.
   • If this browser holds another launch's draft, click Discard draft under Your launch on 1 Token before you open the link, so King of the Pool loads with its whole pot.
   • Check that Hook Blocks says The linked pools are this launch's pools, with a pool on ETH and a pool on USDG.
   • Keep Runs on at Hookr's hook.
   

2. Name the token

   • Open 1 Token and pick New token.
   • Type Moon under Name and MOON under Ticker.
   • Leave Supply at 1,000,000,000.
   

3. Open pool 1 on ETH

   • Open 2 Pools.
   • On Pool 1 · MOON / ETH, type 0.000001 under Opening price. The prices and ranges here are examples.
   • Leave Full range off. Type 0.000001 under Range from and 0.001 under Range to.
   • Check that the card reads tick spacing 60 and Share of supply 70.
   

4. Open pool 2 on USDG

   • On Pool 2 · MOON / USDG, type 0.004 under Opening price.
   • Type 0.004 under Range from and 4 under Range to.
   • Check that the card reads tick spacing 10, Share of supply 30 and 4 Hook Blocks · Zap Relay source.
   

5. Keep the supply split

   • Under Pools and trading, keep Supply split on.
   • Leave Opening price check off.
   

6. Check pool 1's Hook Blocks

   • Open 3 Hook Blocks and pick the Pool 1 · MOON / ETH tab.
   • Check Your hook: Anti-Snipe, Dynamic fees, Auto Burn, LP Rewards, Arb recapture lane on with King of the Pool, and an empty Advisory slot.
   

7. Keep King of the Pool on

   • Under Arb recapture by What The Hook, keep King of the Pool switched on.
   • Check Pot 50%, Hookr 25%, What The Hook 25%.
   

8. Name SUN's vault in the Zap Relay source

   • Pick the Pool 2 · MOON / USDG tab and open Zap Relay source in the block list.
   • Leave Cut of each buy at 1%.
   • Clear the Zap vault field, then paste the vault address from SUN's launch receipt. Until you do, it says Needed to launch.
   

9. Check pool 2's Hook Blocks

   • Check Your hook: Zap Relay source fills the Advisory slot and Arb recapture lane stays on.
   • Checks shows Zap vault needs a wallet address until the vault is pasted.
   

10. Leave Team and income as it is

    • Open 4 Team and income and leave every row off.
    

11. Review the two pools

    • Open 5 Review.
    • Check Supply split pool 1 70% · pool 2 30% and that pool 2 adds Zap Relay source to what a buy pays.
    

12. Check the vault before you sign

    • Read Pool 2 feeds a zap.
    • Fix before launching lists the Zap vault until SUN's vault address is pasted. Then connect your wallet and sign.
    

Open in the builder

1. Open the launch page on this family

   • Open the launch page on this family with the button above.
   • Check that Hook Blocks says The linked pools are this launch's pools, with one pool on HOOKR.
   • Keep Runs on at Hookr's hook.
   

2. Pick the token that already trades

   • Open 1 Token and pick Token that already trades.
   • Paste MOON's contract address under Token contract. The pictures use WTH as an example token.
   

3. Open the HOOKR pool

   • Open 2 Pools.
   • Check that the card reads tick spacing 200.
   • Type 1 under Opening price, 0.1 under Range from and 20 under Range to. These are example values.
   • Type 1000 under Token seed and 1000 under Quote seed.
   

4. Set the Zap Relay target

   • Open 3 Hook Blocks and open Zap Relay target in the block list.
   • Under What a zap does, pick Buy and add liquidity.
   • Leave the other settings as they are.
   

5. Check the pool's Hook Blocks

   • Check Your hook: Zap Relay target fills the Advisory slot, Arb recapture lane is off, and Dynamic fees and LP Rewards stay on.
   

6. Leave Team and income as it is

   • Open 4 Team and income and leave every row off.
   

7. Review, make the vault and launch

   • Open 5 Review and read Pool 1 is a Zap Relay target.
   • Connect your wallet, make the zap vault, then sign the launch.
   • Copy the vault's address and give it to SUN's creator.
   

Open in the builder

1. Open the launch page on this family

   • Open the launch page on this family with the button above.
   • Check that Hook Blocks says The linked pools are this launch's pools, with one pool on HOOKR.
   • Keep Runs on at Hookr's hook.
   

2. Pick the token that already trades

   • Open 1 Token and pick Token that already trades.
   • Paste SUN's contract address under Token contract. The pictures use WTH as an example token.
   

3. Open the HOOKR pool

   • Open 2 Pools.
   • Check that the card reads tick spacing 100.
   • Type 1 under Opening price, 0.1 under Range from and 20 under Range to. These are example values.
   • Type 1000 under Token seed and 1000 under Quote seed.
   

4. Name MOON's vault in the Zap Relay source

   • Open 3 Hook Blocks and open Zap Relay source in the block list.
   • Leave Cut of each buy at 1%.
   • Clear the Zap vault field, then paste the vault address from MOON's HOOKR launch receipt.
   

5. Check the pool's Hook Blocks

   • Check Your hook: Zap Relay source fills the Advisory slot and Arb recapture lane stays on with King of the Pool off.
   

6. Leave Team and income as it is

   • Open 4 Team and income and leave every row off.
   

7. Review and launch

   • Open 5 Review and read Pool 1 feeds a zap.
   • Fix before launching lists the Zap vault until MOON's vault is pasted. Then connect your wallet and sign.